เกรดสารเคมี แบรนด์ RCI มีอะไรบ้าง ?

• Reagent for general purposes, used in low grade applications and/or qualitative testing.
  
  

• Use in a wide variety of pharmaceutical industries
• For general analytical applications
• Products that meet the requirements of pharmaceutical standard (Ph.Eur, BP, EP, USP/NF)
  
  

• For general analytical applications
• Purity meets the requirement of ACS Standard
  
  

• High purity solvents and reagents with low level of impurities, conform to ACS, BP, Ph.Eur and EP standard.
• Suitable for laboratory and special analytical techniques.
  
  

• For analytical and preparative separation.
• Mobile phase in HPLC or LC technique including gel permeation chromatography
• Suitable for different type of detector
• Use in the wavelength between 230-190 nm (Far UV region)
• For isocratic technique: low UV absorption
  
  

• For analytical and preparative separation.
• Suitable for HPLC, UPLC / UHPLC / Ultra HPLC - instruments.
• Mobile phase for gradient technique.
• Low baseline drift and low levels of impurities that absorb in the UV region.
  
  

• For analytical and preparative separation.
• Suitable for LCMS analytical technique
• It has high purity solvent with low level of trace metals and was filtered through 0.1 μm filters
• Low fluorescence and high UV transmittance.
• Low acidity & alkalinity, and low particulates to ensure minimal interference.
  
  

Anhydrous Grade

• Low moisture solvent for anhydrous applications
  
  

• High purity solvent for UV-IR Spectroscopy with low absorption.
  
  

• For pesticide and insecticide residue analysis
• Suitable for extraction, isolation and preconcentration technique
• For environment analysis by capillary GC and GC-MS application
• For Volatile Organic Analysis (soil, water and solid waste samples)
  
  

• Suitable for volatile organic residue analysis by GC-MS in water or soil-sediment samples acc. to the EPA purge and trap.
  
  

• High purity solvents designed to ensure optimization for Headspace GC applications.
• Suitable as solvent for the analysis of residual solvent of ICH classes 1, 2 and 3 according to Ph Eur and USP.
• Elimination of all major interference peaks in the elution range of target analyses.
  
  

• Suitable for ultimate organic trace analysis; checked for ppb levels of Poly-Aromatic Hydrocarbons (PAH’s), Furan, PCB’s, Pesticides.
• For analysis of hydrocarbons in the range of C10 to C40.
• For residual organic contaminants.
  
  

• Suitable for Solid Phase Peptide Synthesis.
  
  

• Chemicals in a low level of elemental impurities in part per billion (ppb)
• Suitable for instrumental application in atomic spectroscopy (AAS, ICP‑OES, ICP‑MS), ion chromatography, or voltammetry
• It is a tool for inorganic trace analysis.
  
  

• High purity acids and solvents for electronic industrial applications.
• Low levels of metallic impurities.
  
  

• High purity acids and solvents for cleaning and etching in electronic industrial applications.
• Low levels of metallic impurities.
• Nitric acid 70% and Sulfuric acid 98% low Hg, both suitable for trace metal analysis.
  
  

• High purity solvents for electronic industrial applications.
• Low levels of metallic impurities.
• Free of Silicone, DOP and Amide.
  
  

• Sulfuric acid 89% for semi-conductor industry and other electronic industrial.
• Low levels of metallic impurities content 0.5 ppm maximum.
  
  

• Very high purity acids and solvents for cleaning and etching wafers for the semi-conductor industry and other electronic industrial applications.
• Very low levels of metallic impurities. Used for trace metal analysis.
  
  

• For general use.
  
  

• Specialized for industrial usages.
• Conform to ACS standard.
  
  

• For use in analytical and preparative separation.
• Mobile phase in HPLC or LC technique including gel permeation chromatography.
• Mobile phase for different type of detector.
  
  

• Advanced chemicals for Electronics and Solar PV industries.
  
  

• Advanced chemicals for Electronics and Solar PV industries.